Pilot's Guide
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
190-00663-02 Rev. B
408
AUTOMATIC FLIGHT CONTROL SYSTEM
SELECTED ALTITUDE CAPTURE MODE (ALTS)
SelectedAltitudeCaptureModeisautomaticallyarmedwithactivationofthefollowingmodes:
•PitchHold
•VerticalSpeed
•FlightLevelChange
•Takeoff/GoAround(if theSelected Altitudeis at
least400feetabovethecurrentaircraftaltitude)
•VerticalPathTracking(iftheSelectedAltitudeisto
be captured instead of the VNV Target Altitude)
The white ‘ALTS’ annunciation indicates Selected Altitude Capture Mode is armed (see Figure 7-11 for
example).TheALT SEL Knob is used to set the Selected Altitude (shown above the Altimeter) until Selected
AltitudeCaptureModebecomesactive.
As the aircraft nears the Selected Altitude, the flight director automatically transitions to Selected Altitude
CaptureModewithAltitudeHoldModearmed(Figure7-12).Thisautomatictransitionisindicatedbythe
green‘ALTS’annunciationashingforupto10secondsandtheappearanceofthewhite‘ALT’annunciation.
The Selected Altitude is shown as the AltitudeReferencebesidethe‘ALTS’annunciation.
At 50 feet from the Selected Altitude, the ight director automatically transitions from Selected Altitude
CapturetoAltitudeHoldModeandholdstheSelectedAltitude(shownastheAltitudeReference).AsAltitude
HoldModebecomesactive,thewhite‘ALT’annunciationmovestotheactiveverticalmodeeldandashes
green for 10 seconds to indicate the automatic transition.
Figure 7-12 Automatic Mode Transitions During Altitude Capture
Flash up to 10 sec, Indicating Automatic Transition
Altitude Reference
(in this case, equal to
Selected Altitude)
CHANGING THE SELECTED ALTITUDE
NOTE: Pressing the CWS Button while in Selected Altitude Capture Mode does not cancel the mode.
Use of the ALT SELKnobtochangetheSelectedAltitudewhileSelectedAltitudeCaptureModeisactive
causestheightdirectortoreverttoPitchHoldModewithSelectedAltitudeCaptureModearmedforthe
new Selected Altitude.










