Pilot's Guide

190-00663-02 Rev. B
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
369
HAZARD AVOIDANCE
TheProleViewisbasedonthecurrentaircrafttrack(orheadingiftrackisunavailable)andshowsthehighest
knownterrainorobstacleswithinapredeterminedwidthfromthepresentaircraftpositiontotheendofthe
prolerange.ThewidthoftheProleViewisdeterminedbythephaseofight,asannunciatedontheHSI,
andiswidestduringenrouteoroceanicphases(Table6-12).
Flight Phase Total Profile View Width
Approach 0.6 nm
Departure 0.6 nm
Terminal 2.0 nm
Enroute 4.0 nm
Oceanic 4.0 nm
Table 6-12 Profile View Width Scale
PROFILE PATH
TheProlePathdisplaysthehorizontalandlateralboundariesoftheProleView.Thepathisshownasa
whiterectangleontheNavigationMapPageandisonlyavailablewhenProleViewisenabled.Whiterange
markersbothedgesoftheProlePathrectanglematchtherangemarkersalongthedistancescaleinsidethe
ProleViewdisplaywindowwhenevertheprolerangeisatleast4nm(or7.5kmifconguredformetric
units).
TheProlePathrectanglemaybeconguredonoroff,andtheNavigationMaprangeatwhichtheProle
Path is removed from map display can be changed.
Customizing the Profile Path display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With ‘Map Setup’ highlighted, press the ENT Key (Figure 6-97).
4) Turn the small FMS Knob to select the ‘Profile’ Group and press the ENT Key (Figure 6-98).
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections (Figure 6-99).
• PROFILE PATH – Turns the display of the Profile Path on or off and sets maximum range at which Profile Path
is shown
6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.