Pilot's Guide

190-00663-02 Rev. B Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi 183
FLIGHT MANAGEMENT
USER WAYPOINTS
The system can create and store up to 1,000 user-defined waypoints. User waypoints can be created from any
mappage(exceptPFDInsetMap,AUX-TripPlanningPage,orProcedurePages)byselectingapositiononthe
map using the Joystick, or from the User Waypoint Information Page by referencing a bearing/distance from
an existing waypoint, bearings from two existing waypoints, or a latitude and longitude. Once a waypoint has
been created, it can be renamed, deleted, or moved. Temporary user waypoints are erased upon system power
down.
Figure 5-45 User Waypoint Information Page
Selected User
Waypoint
Navigation Map
Showing Selected
User Waypoint
User Waypoint Info
- Identifier
- Temporary/Normal
- Waypoint Type
User Waypoint List
- Identifier
- Comment
Reference Wpt/Info
- Identifier/Rad/Dist or
- Identifiers/Radials or
- Region/Lat/Long
Softkeys
User Wpt Comment
# User Wpts Used
Displayed if User Wpt
was created on map
page
Selecting a User Waypoint:
1) With the User Waypoint Information Page displayed, enter the name of the User Waypoint, or scroll to the
desired waypoint in the User Waypoint List using the large FMS Knob.
2) Press the ENT Key.
3) Press the FMS Knob to remove the flashing cursor.
Or:
1) With the Nearest User Waypoints Page displayed, press the FMS Knob.
2) Press the ENT Key or turn either FMS Knob to select an identifier in the Nearest USR Box.
3) Press the FMS Knob to remove the flashing cursor.