Pilot's Guide

190-00663-02 Rev. B Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi 120
AUDIO PANEL AND CNS
AUTO-TUNING NAV FREQUENCIES ON APPROACH ACTIVATION
NOTE: The primary NAV frequency is auto-tuned upon loading a VOR or ILS/Localizer approach.
NOTE: When an ILS/LOC approach has been activated in GPS Mode, the system switches to NAV Mode as
the final approach course is intercepted (within 15 nm of the FAF). See the Flight Management Section for
details.
NAVfrequenciesareautomaticallyloadedintotheNAVFrequencyeldonapproachactivation,onboth
PFD1andPFD2.
WhenloadingoractivatingaVORorILS/LOCapproach,theapproachfrequencyisautomaticallytransferred
toaNAVfrequencyeldasfollows:
•IfthecurrentCDInavigationsourceisGPS,theapproachfrequencyistransferredtotheNAV1orNAV2
activefrequencyelds.ThefrequencythatwaspreviouslyintheNAV1orNAV2activefrequencyeldsare
transferred to standby.
•IfthecurrentCDInavigationsourceisGPS,andiftheapproachfrequencyisalreadyloadedintotheNAV1
orNAV2standbyfrequencyeld,thestandbyfrequencyistransferredtoactive.
•IfthecurrentCDInavigationsourceisNAV1orNAV2,theapproachfrequencyistransferredtothestandby
frequencyeldsoftheselectedCDINAVradio.