System Maintenance Manual

Page 3-18 G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 1 190-00716-01
3.9 G1000 Software/Configuration Procedure
This section summarizes the procedures required to load software and configuration files to the G1000. It
is intended to work as a central guide for technicians to use while performing maintenance on the aircraft.
In sections of this manual where software is required to be reloaded, these sections will make reference
back to this Section for instructions. The technician should use proper judgment regarding the context of
maintenance required while following this section.
The following diagram depicts an overview of the software/configuration sequence for the G1000 system.
This applies mostly to a new G1000 system which has not previously been powered up and is for
informative purposes only.
Figure 3-16, Software/Configuration Overview