Cockpit Reference Guide
Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-00 Rev. B 79
Additional Features
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
Set Up a New Wi-Fi Connection
1)
Select the AVAIL Softkey on the MFD. A list of available networks will
be displayed in the AVAILABLE NETWORKS window. Signal strength is
shown for each network, as well as security requirements and whether the
network has been saved in the system’s memory.
2)
If necessary, select the RESCAN Softkey to have the system scan again for
available networks.
Or
:
a)
Press the MENU Key to display the Page Menu.
b)
Turn either FMS Knob to place the cursor on ‘Rescan Available
Networks’.
c)
Press the ENT Key.
3)
Press the FMS Knob to place the cursor in the list of networks.
4)
Turn either FMS Knob to select the desired network.
5)
Select the CONNECT Softkey.
Or
:
a)
Press the MENU Key to display the Page Menu.
b)
Turn either FMS Knob to place the cursor on ‘Connect To Selected
Network’.
c)
Press the ENT Key.
6)
If the network is secured, a window will be displayed in order to enter
the necessary passcode. Use the FMS Knobs to enter the desired alpha
numeric characters. Select the CAP LOCK Softkey to enter upper case
letters. If there is no security associated with the network, proceed to step
9.
7)
Press the ENT Key. ‘OK’ will be highlighted.
8)
Press the ENT Key again.
9)
The SAVE SETTINGS window is now displayed with the cursor highlighting
‘SAVE CONNECTION’.
10)
The selected network can be saved to system memory to make re-
connection easier at a later time.