Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-00 Rev. B
6
Nav/Com/XPDR/Audio Panel
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Without TCAS II Option
1) Press the XPDR Softkey.
2) If the aircraft is equipped with two transponders, press the XPDR1 or
XPDR2 Softkey to select the active transponder.
3) Press the desired transponder mode softkey (STBY, ON, ALT, or GND).
ACTIVATE ADS-B TRANSMIT (NOT AVAILABLE WITH TCAS II)
1) Press the XPDR Softkey to display the transponder mode selection softkeys.
2) Press the ADS-B TX Softkey to enable transmission of three-dimensional
aircraft position and aircraft heading.
3) Press the ADS-B TX Softkey again to disable transmission.
SELECTING A COM RADIO
Transmit/Receive
Press the COM1 MIC , COM2 MIC , or COM3 MIC Key (optional COM, if
installed) on the audio panel.
Receive Only
Press the COM1, COM2 , or COM3 Key (optional COM, if installed) on the
audio panel.
SELECTING A NAV RADIO
1) To begin navigating using a navigation radio, press the CDI Softkey on the
PFD to select VOR1/LOC1 (NAV1) or VOR2/LOC2 (NAV2).
2) Press the NAV1 , NAV2 , DME , or ADF Key on the audio panel to select or
deselect the navigation radio audio source. All radio keys can be selected
individually or together.