Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-00 Rev. B
Appendix
124
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Level 1 Level 2 Level 3 Description
XPDR
Displays transponder mode selection
softkeys
XPDR1
Selects the #1 transponder as active
XPDR2
Selects the #2 transponder as active
STBY
Selects Standby Mode (transponder does
not reply to any interrogations)
ON
Selects Mode A (transponder replies to
interrogations)
ALT
Selects Mode C – Altitude Reporting Mode
(transponder replies to identification and
altitude interrogations)
GND
Manually selects Ground Mode, the
transponder does not allow Mode A
and Mode C replies, but it does permit
acquisition squitter and replies to discretely
addressed Mode S interrogations.
VFR
Automatically enters the VFR code (1200 in
the U.S.A. only)
CODE
Displays transponder code selection
softkeys 0-7
0 — 7
Use numbers to enter code
BKSP
Removes numbers entered, one at a time
IDENT
Activates the Special Position Identification
(SPI) pulse for 18 seconds, identifying the
transponder return on the ATC screen
ADS-B TX
Activates/deactivates transmission of the
aircraft’s three-dimensional position and
aircraft heading for reception by ADS-B
systems.
TMR/REF
Displays Timer/References Window
NRST
Displays Nearest Airports Window
ALERTS
Displays Alerts Window