Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-00 Rev. B
116
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
FLIGHT PLAN IMPORT/EXPORT MESSAGES
In some circumstances, some messages may appear in conjunction with others.
Flight Plan Import/Export
Results
Description
‘Flight plan successfully imported.’ A flight plan file stored on the SD card was successfully
imported as a stored flight plan.
‘File contained user waypoints only. User
waypoints imported successfully. No
stored flight plan data was modified.’
The file stored on the SD card did not contain a flight plan,
only user waypoints. These waypoints have been saved to the
system user waypoints. No flight plans stored in the system
have been modified.
‘No flight plan files found to import.’ The SD card contains no flight plan data.
‘Flight plan import failed.’ Flight plan data was not successfully imported from the SD
card.
‘Flight plan partially imported.’ Some flight plan waypoints were successfully imported
from the SD card, however others had errors and were not
imported. A partial stored flight plan now exists in the
system.
‘File contained user waypoints only.’ The file stored on the SD card did not contain a flight plan,
only user waypoints. One or more of these waypoints did not
import successfully.
‘Too many points. Flight plan truncated.’ The flight plan on the SD card contains more waypoints than
the system can support. The flight plan was imported with as
many waypoints as possible.
‘Some waypoints not loaded. Waypoints
locked.’
The flight plan on the SD card contains one or more
waypoints that the system cannot find in the navigation
database. The flight plan has been imported, but must be
edited within the system before it can be activated for use.
‘User waypoint database full. Not all
loaded.’
The flight plan file on the SD card contains user waypoints.
The quantity of stored user waypoints has exceeded system
capacity, therefore not all the user waypoints on the SD
card have been imported. Any flight plan user waypoints
that were not imported are locked in the flight plan. The
flight plan must be edited within the system before it can be
activated for use.