Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air Page 3-35
190-00915-01 Revision 9
3.21 GWX 68 Software/Configuration
Follow this procedure to configure the GWX 68 Radar if installed. Refer to section 3.22 if the GWX 70
Radar is installed. Coordinate the GWX 68 configuration with Section 7.12 “ or GWX 70 Weather
Radar”.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the
“SYSTEM UPLOAD” page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate the small
FMS knob to highlight “King Air – Garmin Options” and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight “King Air - GWX 68”. Press ENT key on PFD1.
4. Verify “King Air - GWX 68” is displayed in the “Item” window. Press “LOAD” softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
• Green “PASS” in the Configuration column and Software columns for each item loaded.
• “Upload Complete………….COMPLETE” in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.