Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air Page 3-13
190-00915-01 Revision 9
3.8.2 Loader Card Creation
The software image is an executable self-extracting file which builds the correct file structure onto an SD
card for use loading software to the G1000 and GFC700. To create a software loader card, follow the
procedures outlined below.
NOTE
In order to create a 200/B200 loader card, the individual/facility completing these
procedures, must be an authorized King Air 200/B200 service center to gain access to the
necessary data via the Garmin website.
1. Go to www.garmin.com
and click on the Dealer Resource Center link in the lower portion of the home
page. Enter username and password.
2. Click the I Agree button on the confidentiality agreement page.
3. Select Technical Tools
then select Software Downloads.
4. In the Keyword(s)
filter, enter “0985” and click on the Go button.
5. A screen similar to the one shown below will appear. The numbers shown are for example only.
6. Click on the download symbol for the appropriate software version part number based upon the information
provided in Garmin GA Drawing 005-00421-03 and save the file to the local hard drive.
Download
symbol