Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air Page 7-67
190-00915-01 Revision 9
7.31 Search and Rescue Functional Check
1. On the MFD, press the “FPL” key to display the Active Flight Plan Menu.
2. Press the “MENU” key to display the PAGE MENU Options.
3. Scroll through the choices with the FMS knob and select “Search and Rescue”.
4. Press “ENT” key to complete the selection and view the SAR flight plan menus.
5. From the Search and Rescue Menu, turn the large and small FMS knobs to enter the starting
waypoint.
6. Press ENT key to complete the selection and move to the next option, “PATTERN” type.
7. Use the FMS knob to move to the PATTERN type and select “PARALLEL”.
8. With the FMS knob scroll through the options and change the fields as desired, or leave the
default entries.
9. Press ENT key with the “ACTIVATE SAR?” field highlighted, to complete and activate the
flight plan.
10. Verify the parallel track search pattern is on the Navigation Map page.
If no other service is to be performed, continue to the return-to-service checks in Section 8.