Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-04 Rev. A
42
Hazard Avoidance
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Lightning Age Symbol
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
Select ‘Cell’ or ‘Strike’ as the Stormscope Lightning Mode
1) Press the MENU Key (with the Navigation Map Page displayed).
2) Turn either FMS Knob to highlight ‘Map Setup’.
3) Press the ENT Key.
4) Turn the small FMS Knob to highlight ‘Weather’.
5) Press the ENT Key.
6) Turn the large FMS Knob to place the cursor in the ‘STRMSCP MODE’ field.
7) Turn the small FMS Knob to display the ‘Cell/Strike’ window.
8) Turn either FMS Knob to select ‘Cell’ or ‘Strike’. Press the ENT Key.
9) Push the FMS Knob to return to the Navigation Map Page.
Clear Stormscope Lightning Data from the Navigation Map Page
1) Press the MENU Key (with the Navigation Map Page displayed).
2) Turn either FMS Knob to highlight the ‘Clear Stormscope® Lightning’ field
and press the ENT Key.
NOTE: If heading input is lost, strikes and/or cells must be cleared manually
after the execution of each turn. This is to ensure that the strike and/or cell
positions are depicted accurately in relation to the nose of the aircraft.
Stormscope Page
1) Turn the large FMS Knob until the Map Page group is selected.
2) Turn the small FMS Knob select the Stormscope Page.