Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-04 Rev. A 73
Additional Features
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
View Airport Directory Information
While viewing the WPT-Airport Information Page, if necessary, select the
INFO-1 Softkey to change the softkey label to display INFO-2. Airport
Directory information is displayed on the right half of the display.
SATELLITE TELEPHONE AND DATA LINK SERVICES
NOTE: Separate accounts must be established to access the Iridium satellite
network for voice/SMS and low speed data transmission, and high speed data
transmission for the maintenance reports.
Operation of these features in the cockpit is accomplished through the AUX-
TELEPHONE, AUX-TEXT MESSAGING, and AUX-WI-FI SETUP Pages. For operation
using the cabin handset, consult the instructions provided with the handset.
Registering with Garmin Flight Data Services
A subscriber account must be established prior to receiving Connext Weather
products. Contact Garmin Flight Data Services at https://fly.garmin.com/fly-garmin/
support/applications/satelliteservices/ or by calling 1-866-739-5687 in the United
States or [phone]-1135. The following information is required to register for
Connext Weather services: G1000 System ID, GSR56 (GSR1) Serial Number(s), Tail
Number, Serial/Airframe Number, Country of Registration, Aircraft Manufacturer, and
Aircraft Model.
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select the AUX-SYSTEM STATUS. Note the
System ID and GSR1 Serial Number in the AIRFRAME field.
Activating Connext Weather Registration:
After a subscriber account has been established, the system must be activated
for data link features such as reporting services or Connext Weather. Activation is
accomplished by entering the required access code. This process is only performed
when initially setting up the system for Connext services.
1) Ensure the aircraft is outside with a clear view of the sky.
2) Turn the large FMS Knob to select the MAP Page group.
3) Turn the small FMS Knob to select the MAP-WEATHER DATA LINK (CNXT)
Page.