Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-04 Rev. A
46
Hazard Avoidance
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
CONNEXT WEATHER (OPTIONAL)
NOTE: The availability of specific Garmin Connext Weather products varies by
region. For product coverage information, refer to fly.garmin.com/fly-garmin/
gfds-weather.
Weather data is provided when the pilot initiates either a manual or automatic
Connext data request on the Weather Data Link (CNXT) Page on the MFD. No
weather data is displayed until the first Connext Weather Data Request is made.
Registering with Garmin Flight Data Services
A subscriber account must be established prior to receiving Connext Weather
products. Contact Garmin Flight Data Services at https://fly.garmin.com/fly-garmin/
support/applications/satelliteservices/ or by calling 1-866-739-5687 in the United
States or [phone]-1135. The following information is required to register for
Connext Weather services: G1000 System ID, GSR56 (GSR1) Serial Number(s), Tail
Number, Serail/Airframe Number, Country of Registration, Aircraft Manufacturer, and
Aircraft Model.
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select the AUX-SYSTEM STATUS. Note the
System ID and GSR1 Serial Number in the AIRFRAME field.
Activating Connext Weather Registration:
After a subscriber account has been established, the system must be activated
for data link features such as reporting services or Connext Weather. Activation is
accomplished by entering the required access code. This process is only performed
when initially setting up the system for Connext services.
1) Ensure the aircraft is outside with a clear view of the sky.
2) Turn the large FMS Knob to select the MAP Page group.
3) Turn the small FMS Knob to select the MAP-WEATHER DATA LINK (CNXT)
Page.
4) Press the MENU Key. If necessary, select ‘Display Connext Weather’.
5) Press ENT Key. The ‘CONNEXT REGISTRATION’ Window is now displayed.
6) Using the FMS Knob enter the access code obtained from Garmin Flight
Data Services in the ACCESS CODE field.