Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-04 Rev. A 127
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
Message Comments
PTK FAIL – Parallel track
unavailable: bad geometry.
Bad parallel track geometry.
PTK FAIL – Parallel track
unavailable: invalid leg type.
Invalid leg type for parallel offset.
PTK FAIL – Parallel track
unavailable: past IAF.
IAF waypoint for parallel offset has been
passed.
UNABLE V WPT – Can’t reach
current vertical waypoint.
The current vertical waypoint can not be
reached within the maximum flight path angle
and vertical speed constraints. The system
automatically transitions to the next vertical
waypoint.
VNV – Unavailable. Unsupported
leg type in flight plan.
The lateral flight plan contains a procedure
turn, vector, or other unsupported leg type
prior to the active vertical waypoint. This
prevents vertical guidance to the active vertical
waypoint.
VNV – Unavailable. Excessive track
angle error.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
VNV – Unavailable. Excessive
crosstrack error.
The current crosstrack exceeds the limit, causing
vertical deviation to go invalid.
VNV – Unavailable. Parallel course
selected.
A parallel course has been selected, causing the
vertical deviation to go invalid.
TRAFFIC FAIL – Traffic device has
failed.
The system is no longer receiving data from
the traffic system. The traffic device should be
serviced.
NON WGS84 WPT – Do not use
GPS for navigation to [xxxx]
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in error
as displayed. Do not use GPS to navigate to
the selected non-WGS84 waypoint.
STRMSCP FAIL – Stormscope has
failed.
Stormscope has failed. The G1000
™
system
should be serviced.