Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-04 Rev. A 117
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
Message Comments
G/S1 SERVICE – G/S1 needs
service. Return unit for repair.
A failure has been detected in glideslope
receiver 1 and/or receiver 2. The receiver may
still be available. The system should be serviced
when possible.
G/S2 SERVICE – G/S2 needs
service. Return unit for repair.
UNABLE RNP – Estimated position
error exceeds RNP.
The estimated GPS position error exceeds the RNP
limits. Check GPS sensors.
UNABLE RNP APR – GPS integerity
lost. Check GPS sensors.
The estimated GPS position error exceeds the
requirements for the current approach. Check GPS
sensor
APR ADVISORY – SBAS VNAV not
available. Using Baro VNAV.
SBAS VNAV not available. Check GPS sensor.
GSD 41 MESSAGE ADVISORIES (OPTIONAL)
Message Comments
GSD1 CONFIG – GSD1 config error.
Config service req’d.
GSD1 and the CDU have different copies of
the GSD1 configuration.
GSD1 COOLING – GSD1 temperature
too low.
GSD1 is reporting a low temperature
condition.
GSD1 SERVICE – GSD1 needs service.
Return unit for repair.
GSD1 is reporting an internal error condition.
The GSD may still be usable.
GSD1 MANIFEST – GSD1 software
mismatch. Communication halted.
GSD1 has incorrect software installed. The
system should be serviced.
GEA 71 MESSAGE ADVISORIES
Message Comments
GEA1 CONFIG – GEA1 config error.
Config service req’d.
The GEA1 configuration settings do not match
those of backup configuration memory. The
system should be serviced.
GEA2 CONFIG – GEA2 config error.
Config service req’d.
The GEA2 configuration settings do not match
those of backup configuration memory. The
system should be serviced.