Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-04 Rev. A 109
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
Message Comments
CNFG MODULE – PFD1
configuration module is
inoperative.
The PFD1 configuration module backup memory
has failed. The system should be serviced.
PFD1 VOLTAGE – PFD1 has low
voltage. Reducing power usage
The PFD1 voltage is low. The system should be
serviced.
PFD2 VOLTAGE – PFD2 has low
voltage. Reducing power usage
The PFD2 voltage is low. The system should be
serviced.
MFD1 VOLTAGE – MFD1 has low
voltage. Reducing power usage
The MFD voltage is low. The system should be
serviced.
[PFD1, PFD2, or MFD1] BKLT CAL
INV – calibration lost or mismatch.
Return for repair.
The PFD1, PFD2 and/or MFD backlight calibration
cannot be found or is invalid. The system should
be serviced.
DATABASE MESSAGE ADVISORIES
Message Comments
MFD1 DB ERR – MFD1 navigation
database error exists.
The MFD and/or PFD detected a failure in the
navigation database. Attempt to reload the
navigation database. If problem persists, the
system should be serviced.
PFD1 DB ERR – PFD1 navigation
database error exists.
PFD2 DB ERR – PFD2 navigation
database error exists.
MFD1 DB ERR – MFD1 basemap
database error exists.
The MFD and/or PFD detected a failure in the
basemap database.
PFD1 DB ERR – PFD1 basemap
database error exists.
PFD2 DB ERR – PFD2 basemap
database error exists.