Instruction Manual

Page 3-26 G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air
Revision 8 190-00915-01
3.12 TAWS-A Voice Callout Option Configuration
This section applies only to installations with the TAWS-A option. This step is necessary only if
TAWS-A voice callouts (400, 300, 200, 100) have been disabled and are now desired. TAWS-A voice
callouts are the default configuration. Follow the procedures outlined in this section to load the
necessary configuration files to enable TAWS-A voice callouts.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “SYSTEM
UPLOAD” page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display drop down menu. Highlight King Air - Options
and press ENT key on PFD1.
3. Rotate the small FMS knob to select “TAWS-A Voice Callout Installation Option”. Press ENT key on
PFD1.
4. Verify the “TAWS-A Voice Callout Installation Option” is displayed in the “Item” window. Press
“LOAD”.
Figure 3-23, TAWS-A Voice Callout Configuration
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
• Green “PASS” in Configuration column for AIRFRAME.
• “Upload Complete………….COMPLETE” in the summary box.
6. Select “ENT” key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.