Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air Page 7-43
190-00915-01 Revision 8
7.23 RVSM Checks
The following are required initial and continued airworthiness checks to verify proper configuration for
operation in RVSM airspace. RVSM operations are prohibited until the all of the RVSM checks are
completed successfully.
7.23.1 RVSM Required Avionics Check
With the PFD in configuration mode, select the System Status page using the small FMS knob. Press the
small FMS knob to activate the cursor. Highlight each of the following items in the LRU window and
verify that the required software part number and version matches the information in the General
Arrangement drawing listed in Table 1-2. Verify hardware part number by visual inspection of the units.
Record the results in
Table 7-8.
DESCRIPTION PART NUMBER DESCRIPTION PART NUMBER VER
MAIN SUB-SYSTEM GIA1
AUDIO GIA1 AUDIO
GPS/WAAS ENGINE GPS1
CERTIFICATION GAINS GFC CERT GIA 1
MAIN SUB-SYSTEM GIA2
AUDIO GIA2 AUDIO
GPS/WAAS ENGINE GPS2
CERTIFICATION GAINS GFC CERT GIA 2
SYSTEM PFD1
FPGA PFD1 FPGA
SYSTEM PFD2
FPGA PFD2 FPGA
SYSTEM MFD1
FPGA MFD FPGA
SYSTEM GDC1
FPGA GDC1 FPGA
SYSTEM GDC2
FPGA GDC2 FPGA
GTX 33 TRANSPONDER #1
GTX 33D (OPTIONAL)
GTX 33 TRANSPONDER #2
GTX 33D (OPTIONAL)
GTX1GTX 33 SYSTEM
7
GDC 74B ADC #2
GDC 7400 (OPTIONAL)
GTX2GTX 33 SYSTEM
GDU 1500 MFD
4
GDU 1040A PFD#2
GDC 74B ADC #1
GDC 7400 (OPTIONAL)
SYSTEM STATUS
REPORT
1
GIA 63W IAU #1
HARDWARE
ITEM
SOFTWARE
OK OK
9
GDU 1040A PFD#1
2
GIA 63W IAU #2
3
5
6
8
Table 7-8, RVSM Required Avionics