Instruction Manual

Page 6-20 G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air
Revision 8 190-00915-01
5. Reinstall the cabin center floor panel.
6. If new unit is installed, register with Garmin Flight Data Services per Section 7.27.
7. Configure the GDL 59 per Section 3.21 and 3.23. Test the GDL 59 per Section 7.28.
6.34 GSR 56 Satellite Receiver
Removal:
1. Gain access by removing the cabin center floor panel at the main entry door.
2. Detach the two rack mount angles from the remote equipment shelf. Retain all mounting
hardware
.
3. Unlock the unit from the rack by loosening the ratcheting latch mechanism.
4. Remove the unit from the rack.
Reinstallation:
1. Visually inspect the connectors to ensure there are no bent or damaged pins. Repair any damage.
2. Insert the unit into the installation rack.
CAUTION:
Do not use excessive force when inserting the GDL 56 into the
rack. This may cause damage to occur to the connectors, unit,
and/or unit rack. If heavy resistance is felt during installation,
stop! Remove the GDL 56 and identify the source of resistance.
3. Lock the unit into the rack by using the ratcheting latch mechanism.
4. Reinstall the cabin center floor panel.
5. If new unit is installed, register with Garmin Flight Data Services per Section 7.27.
6. No configuration is required for the GSR 56. Test the GSR 56 according to Section 7.29.