Instruction Manual

Page 5-12 G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air
Revision 8 190-00915-01
GIA1 ARINC 429
Channel LRU Indicator Status
IN2 GRS 77 #2
Green
GIA1/GRS 77 #2 data path is functioning correctly.
Red
GIA1/GRS 77 #2 data path is not functioning correctly.
• Reload GIA1 configuration file.
• Swap GIA1 and GIA2, reconfigure both GIA’s to their new
locations to confirm if the problem is in the original GIA1.
o Replace original GIA1 if box turns green after
swapping units.
• Swap GRS1 and GRS2 (no reconfiguration required) to
confirm if the problem is in the original GRS2.
o Replace original GRS2 if box turns green after
swapping units.
• Check the GIA1/GRS 77 #2 interconnect wiring for faults.
Amber
GIA1/GRS 77 #2 data path functionality is unknown. Reload
GIA1 configuration files.
IN 5
GDC 74 #1
Or
GDC7400 #1
Green
GIA1/GDC #1 data path is functioning correctly.
Red
GIA1/GDC #1 data path is not functioning correctly.
• Load GIA1 and GDC #1 configuration files.
• Swap GIA1 and GIA2, reconfigure both GIA’s to their new
locations to confirm if the problem is in the original GIA1.
o Replace original GIA1 if box turns green after
swapping units.
• Check the GIA1/GDC #1 interconnect wiring for faults.
Replace GDC #1 if problem remains.
Amber
GIA1/GDC #1 data path functionality is unknown. Reload
GIA1 configuration files.
IN 6 GRS 77 #1
Green
GIA1/GRS 77 #1 data path is functioning correctly.
Red
GIA1/GRS 77 #1 data path is not functioning correctly.
• Load GIA1 configuration files.
• Swap GIA1 and GIA2, reconfigure both GIA’s to their new
locations to confirm if the problem is in the original GIA1.
o Replace original GIA1 if box turns green after
swapping units.
• Swap GRS1 and GRS2 (no reconfiguration required, ref.
GRS Configuration and Testing sections) to confirm if the
problem is in the original GRS1.
o Replace original GRS1 if box turns green after
swapping units.
• Check the GIA1/GRS 77 #1 interconnect wiring for faults.
Amber
GIA1/GRS 77 #1 data path functionality is unknown. Reload
GIA1 configuration files.