System Maintenance Manual

G1000 / GFC 700 System Maintenance Manual - 200/B200 Series King Air Page 3-37
190-00915-01 Revision 7
3.23 GSR 56 Satellite Reciever Option Configuration
Follow this procedure to enable the optional GSR 56 satellite receiver function. Note that the GDL 59
wi-fi data link option must be loaded per Section 3.21 prior to loading the GSR 56 option.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “SYSTEM
UPLOAD” page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display drop down menu. Highlight King Air - Options
and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight “GSR 56”. Press ENT key on PFD1.
4. Verify “GSR 56” is displayed in the “Item” window. Press “LOAD”.
Figure 3-35, GSR 56 Configuration
5. Monitor load progress. Verify software load completes without errors as indicated by the following:
• Green “PASS” in Configuration column for AIRFRAME, GDL 59, and ECTM/Exceedance Reports.
• “Upload Complete………….COMPLETE” in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.