Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-03 Rev. A
52
Hazard Avoidance
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Traffic Advisory System (TAS) (Optional)
System Self Test
1) Set the range to 2/6 nm.
2) Select the STANDBY Softkey.
3) Select the TEST Softkey.
4) Self test will take approximately eight seconds to complete. When
completed successfully, traffic symbols will be displayed and a voice alert
appropriate for the installed system will be heard indicating the test passed
(see Annuciations & Alerts section). If the self test fails, the system will
revert to Standby Mode and a voice alert appropriate for the installed
system will be heard indicating the test failed.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the second rectangular page icon.
3) Select the OPERATE or NORMAL Softkey to begin displaying traffic.
‘OPERATING’ is displayed in the Traffic Mode field.
4) Select the ALT MODE Softkey to change the altitude display volume.
Select the desired altitude volume by selecting the BELOW, NORMAL,
ABOVE, or UNREST (unrestricted) Softkey. The selection is displayed in the
Altitude Mode field.
5) Select the STANDBY Softkey to place the system in the Standby Mode.
‘STANDBY’ will be displayed in the Traffic Mode field.
6) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
7) Select the FLT ID Softkey (GTS 820/850 only) to enable or disable Flight ID
displayed with the intruder information.
Displaying Traffic on the Navigation Map
1) With the Navigation Map displayed, select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic will now be displayed on the map.