Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-03 Rev. A 117
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features Annun/Alerts Appendix Index
Flight Plan Import/Export
Results
Description
‘File contained user waypoints only.’ The file stored on the SD card did not contain a flight plan,
only user waypoints. One or more of these waypoints did not
import successfully.
‘Too many points. Flight plan truncated.’ The flight plan on the SD card contains more waypoints than
the system can support. The flight plan was imported with as
many waypoints as possible.
‘Some waypoints not loaded. Waypoints
locked.’
The flight plan on the SD card contains one or more
waypoints that the system cannot find in the navigation
database. The flight plan has been imported, but must be
edited within the system before it can be activated for use.
‘User waypoint database full. Not all
loaded.’
The flight plan file on the SD card contains user waypoints.
The quantity of stored user waypoints has exceeded system
capacity, therefore not all the user waypoints on the SD
card have been imported. Any flight plan user waypoints
that were not imported are locked in the flight plan. The
flight plan must be edited within the system before it can be
activated for use.
‘One or more user waypoints renamed.’ One or more imported user waypoints were renamed when
imported due to naming conflicts with waypoints already
existing in the system.
‘Flight plan successfully exported.’ The stored flight plan was successfully exported to the SD
card.
‘Flight plan export failed.’ The stored flight plan was not successfully exported to the SD
card. The SD card may not have sufficient available memory
or the card may have been removed prematurely.