Pilot's Guide

Garmin G1000 Pilot’s Guide for the Beechcraft C90A/GT/GTi
190-00663-03 Rev. A
440
AUTOMATIC FLIGHT CONTROL SYSTEM
CHANGING THE SELECTED COURSE
If the navigation source is VOR or localizer or OBS Mode has been enabled when using GPS, the Selected
Course is controlled using the CRS Knob corresponding to the selected flight director (CRS1 for the pilot
side, CRS2 for the copilot side).
Pressing the CWS Button and hand-flying the aircraft does not change the Selected Course while in
Navigation Mode. The autopilot guides the aircraft back to the Selected Course (or GPS flight plan) when the
CWS Button is released.
Figure 7-32 Navigation Mode
GPS Navigation
Mode Active
Command Bars Indicate Left
Turn to Track GPS Course
GPS is Selected
Navigation Source
Selected
Course