Pilot's Guide

Garmin G1000 Pilot’s Guide for the Beechcraft C90A/GT/GTi
190-00663-03 Rev. A382
HAZARD AVOIDANCE
profile range. The width of the Profile View is determined by the phase of flight, and is widest during enroute
or oceanic phases (Table 6-11).
Flight Phase Total Profile View Width
Approach 0.6 nm
Departure 0.6 nm
Terminal 2.0 nm
Enroute 4.0 nm
Oceanic 4.0 nm
Table 6-11 Profile View Width Scale
PROFILE PATH
The Profile Path displays the horizontal and lateral boundaries of the Profile View. The path is shown as a
white rectangle on the Navigation Map Page and is only available when Profile View is enabled. White range
markers both edges of the Profile Path rectangle match the range markers along the distance scale inside the
Profile View display window whenever the profile range is at least 4 nm (or 7.5 km if configured for metric
units).
The Profile Path rectangle may be enabled/disabled, and the Navigation Map range at which the Profile Path
is removed from map display can be changed.
Customizing the Profile Path display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With ‘Map Setup’ highlighted, press the ENT Key (Figure 6-97).
4) Turn the small FMS Knob to select the ‘Profile’ Group and press the ENT Key (Figure 6-98).
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections (Figure 6-99).
• PROFILE PATH – Turns the display of the Profile Path on or off and sets maximum range at which Profile Path
is shown
6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.