Pilot's Guide

190-00663-03 Rev. A
Garmin G1000 Pilot’s Guide for the Beechcraft C90A/GT/GTi
327
HAZARD AVOIDANCE
Displaying METAR and TAF text:
1) On the Weather Data Link (XM) Page, select the METAR Softkey.
2) Press the Joystick and pan to the desired airport.
3) Press the ENT Key. The Weather Information Page is shown with METAR and TAF text.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF text. METAR text must be completely
scrolled through before scrolling through the TAF text.
5) Press the FMS Knob or the CLR Key to return to the XM Weather Data Link (XM) Page.
Or:
1) Select the Weather Information Page.
a) Turn the large FMS Knob to select the Waypoint Page Group.
b) Select the WX Softkey to select the Weather Information Page.
2) Press the FMS Knob to display the cursor.
3) Use the FMS Knob to enter the desired airport and press the ENT Key.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF text. Note that the METAR text must
be completely scrolled through before scrolling through the TAF text.
Original
TAF Text
METAR
Symbol
Decoded
METAR
Text
Figure 6-25 METAR and TAF Information on the Airport Information Page
Original
METAR
Text
Original METAR text is also accessible while panning the map cursor over a METAR flag on any map page
on which a METAR is displayed. The METAR text is shown in a box near the METAR flag.
In addition, METAR flags and their associated text are displayed on the Active Flight Plan Page on the MF.D.
The system shows a METAR flag next to waypoints in the flight plan with an available METAR.