System Maintenance Manual

G1000/GFC700 System Maintenance Manual – C90A/C90GT/C90GTi King Air Page 3-19
190-00682-01 Revision G
3.8.4.1 Airframe and Optional Configurations
Optional equipment configurations are available with the C90A/GT/GTi. These files are loaded after the
factory default configuration is established. Each option modifies one or more of the above configuration
files, depending on what setting changes are required to activate the optional equipment. It should be
noted that any required supporting hardware for the option must be installed before the option can
function.
The following default configuration appears at the System Upload page within the FILE menu, when the
“C90” choice is selected from the AIRFRAME menu.
King Air C90 – Baseline
The following optional configurations appear at the System Upload page within the FILE menu, when the
“C90-Configurations” choice is selected from the AIRFRAME menu. These options are associated with
various Blackhawk, Silverhawk, Raisbeck, C90GT, or C90GTi configurations. If reloading
configuration, refer to Table 5 of the General Arrangement Drawing, listed in Table 1-2, to identify the
appropriate configuration for your aircraft. If the technician needs to determine the configuration of an
existing installation, refer to Section 1.1.2.
King Air C90A – Config 1 King Air C90A – Config 11
King Air C90A – Config 2 King Air C90A – Config 12
King Air C90A – Config 3 King Air C90A – Config 13
King Air C90A – Config 4 King Air C90A – Config 14
King Air C90A – Config 5 King Air C90A – Config 15
King Air C90A – Config 6 King Air C90A – Config 16
King Air C90A – Config 7 King Air C90GT/GTi – Config 17
King Air C90A – Config 8 King Air C90GT/GTi – Config 18
King Air C90A – Config 9 King Air C90A – Config 19
King Air C90A – Config 10 King Air C90A – Config 20
The following optional configurations appear at the System Upload page within the FILE menu, when the
“C90-Configurations 2” choice is selected from the AIRFRAME menu. These options are associated
with Beechcraft factory configurations. If reloading configuration, refer to Table 5 of the General
Arrangement Drawing, listed in Table 1-2, to identify the appropriate configuration for your aircraft. If
the technician needs to determine the configuration of an existing installation, refer to Section 1.1.2.
King Air C90A – Config 21
King Air C90A – Config 22