Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
1-5
SECTION 1
SYSTEM OVERVIEW
PFD
Press the STD BARO or BACK softkeys
to return to the top level softkeys
Press the DFLTS softkey to change the PFD
metric values to standard
STD BARO
BACK
ALERTS
BRG2
BRG1
METRIC
DFLTS
DME
(optional)
Figure 1-4 PFD Softkey Flow Chart – 2
BRG2 (bearing) – Press to cycle through the follow-
ing Nav sources, making the pointer the indica-
tor for the corresponding source and displaying
the appropriate information.
NAV2 – Displays NAV2 waypoint frequency or
identifier and DME information in the BRG2
information window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG2 information
window.
ADF – Displays ADF in the BRG2 information
window.
OFF – Removes the BRG2 information
window.
STD BARO – Press to set the barometric pressure
to 29.92 inches of mercury (1013 hPa by
pressing the
METRIC softkey).
BACK – Press to return to the previous level
softkeys.
OBS – Press to select OBS mode on the CDI when
navigating by GPS (only available with active leg).
CDI – Press to change navigation mode on the CDI
between GPS, VOR1 and VOR2.
DME (optional) – Press to display the DME Tuning
window.
XPDR – Press to display the transponder mode selec-
tion softkeys.
STBY – Press to select standby mode.
ON – Press to select mode A.
ALT – Press to select altitude reporting mode.
VFR – Press to automatically squawk 1200 (only
in the U.S.A., refer to ICAO standards for VFR
codes in other countries).
CODE – Press to display transponder code selection
softkeys 0-7.
0 through 7 – Press numbers to enter code.