Owner's Manual
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
This device passes electric current through the user to conduct
measurements. This device should not be used by individuals
with pacemakers or other internal medical devices. Consult your
physician before using this product if you are pregnant or if you
think you may be pregnant.
Device Overview
À
LCD screen
Á
Reset key
Â
Units of measure switch
Ã
Battery door
Installing the Risers
For the most accurate weight measurement, you should use the
device on a hard, flat floor. If you plan to use your device on a
carpeted floor, you should install the included risers. The risers
are not necessary when you use the device on a hard floor.
Press a riser onto each foot on the device.
Installing the Batteries
The device operates on four AA batteries.
1
Remove the battery cover.
2
Insert four AA batteries, observing polarity.
3
Replace the battery cover.
After installing the batteries, the wireless indicator lights on the
LCD screen flash and appears to indicate the device is
ready to set up.
Changing the Units of Measure
On the underside of the scale, slide the switch to your
preferred unit of measure.
Status Icons
Icons appear on the LCD screen to indicate connection status
and to indicate which metric is displayed on the screen. Flashing
wireless signal icons indicate the device is searching for a
signal. A solid icon means the device is connected using the
corresponding wireless technology.
Wi‑Fi
®
signal status
Bluetooth
®
wireless signal status
ANT
®
wireless signal status
Body mass index
Body fat percentage
Body water percentage
Skeletal muscle mass
Bone mass
Low battery
Guest user
Setup mode
A software update or software maintenance connection
status
Data upload or software update was successful
Data upload or software update was unsuccessful
Setting Up Your Device
You must set up your Garmin Index device with Garmin
Connect
™
and connect it to a compatible Wi‑Fi router before you
can use all of the features of the device.
1
Go to www.garminconnect.com/indexscale.
2
Select an option:
• Select Mobile to set up your device using the Garmin
Connect Mobile app.
• Select WPS to set up your device using a WPS-enabled
Wi‑Fi router.
Getting Started 1