User manual
Table Of Contents
- Table of Contents
- Introduction
- Using the Main Pages
- Navigation
- FIND Page
- Waypoints
- Saving Your Current Location as a Waypoint
- Saving a Location on the Map as a Waypoint
- Navigating to a Waypoint
- Finding a Saved Waypoint
- Editing a Waypoint
- Deleting a Waypoint
- Changing the Photo for a Waypoint
- Increasing the Accuracy of a Waypoint Location
- Projecting a Waypoint from a Saved Waypoint
- Moving a Waypoint on the Map
- Finding a Location Near a Waypoint
- Setting a Waypoint Proximity Alarm
- Adding a Waypoint to a Route
- Repositioning a Waypoint to Your Current Location
- Routes
- Recordings
- Main Menu Tools
- Customizing the Device
- Device Information
- Appendix
- Index
Connecting the Device to External Power
NOTICE
To prevent corrosion, thoroughly dry the USB port, the serial port, the weather cap, and the surrounding area
before connecting to a computer or external cable.
Before you can connect the device to external power using a USB cable, you must change the serial interface
setting to Garmin Spanner (Serial Interface Settings, page 25).
1 Lift the weather cap .
2 Select an option:
• To connect to a compatible 5 V AC power adapter (sold separately), connect the small end of the
included USB cable to the USB port on the device.
• To connect to a NMEA
®
0183 device, connect a 12 V serial/data power cable (sold separately) to the
serial port on the device.
Optional accessories are available at buy.garmin.com or from your Garmin
®
dealer.
4 Introduction