User manual
Table Of Contents
- Table of Contents
- Introduction
- Using the Main Pages
- Navigation
- FIND Page
- Waypoints
- Saving Your Current Location as a Waypoint
- Saving a Location on the Map as a Waypoint
- Navigating to a Waypoint
- Finding a Saved Waypoint
- Editing a Waypoint
- Deleting a Waypoint
- Changing the Photo for a Waypoint
- Increasing the Accuracy of a Waypoint Location
- Projecting a Waypoint from a Saved Waypoint
- Moving a Waypoint on the Map
- Finding a Location Near a Waypoint
- Setting a Waypoint Proximity Alarm
- Adding a Waypoint to a Route
- Repositioning a Waypoint to Your Current Location
- Routes
- Recordings
- Main Menu Tools
- Customizing the Device
- Device Information
- Appendix
- Index
Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Getting Started
When using your device the first time, you should complete these tasks to set it up and get to know the basic
features.
1 Install the batteries (Installing Batteries, page 3).
2 Press and hold to turn on the device.
3 Acquire satellites (Acquiring Satellite Signals, page 6).
4 Calibrate the compass (Calibrating the Compass, page 8).
5 Mark a waypoint (Saving Your Current Location as a Waypoint, page 12).
6 Navigate to a destination (Navigating to a Destination, page 11).
Introduction 1