User manual

Logging the Attempt
After you have attempted to find a geocache, you can log your results. You can verify some geocaches at
www.geocaching.com.
1 Select Geocaching > Log.
2 Select Found, Did Not Find, Needs Repair, or Unattempted.
3 Select an option:
• To stop logging, select Done.
• To begin navigation to the geocache nearest you, select Find Next Closest.
• To enter a comment about looking for the cache or about the cache itself, select Edit Comment, enter a
comment, and select Done.
If you are signed in to www.geocaching.com, the log uploads to your www.geocaching.com account
automatically.
chirp
A chirp is a small Garmin accessory that is programmed and left in a geocache. You can use your device to find
a chirp in a geocache.
Enabling chirp Searching
1 Select Setup > Geocaching.
2 Select chirp™ Searching > On.
Finding a Geocache with a chirp
1 With chirp searching enabled, navigate to a geocache.
When you are within approximately 10 m (33 ft.) of the geocache that contains a chirp, details about the
chirp appear.
2 Select Show Details.
3 If necessary, select Go to navigate to the next stage of the geocache.
Removing Live Geocache Data from the Device
You can remove live geocache data to show only geocaches manually loaded on the device using a computer.
Select Setup > Geocaching > Geocaching Live > Remove Live Data.
Live geocaching data is removed from the device and no longer appears in the geocache list.
Removing Your Device Registration From Geocaching.com
If you transfer ownership of your device, you can remove your device registration from the geocaching website.
Select Setup > Geocaching > Geocaching Live > Unregister Device.
Setting a Proximity Alarm
Proximity alarms alert you when you are within a specified range of a particular location.
1 Select Proximity Alarms > Create Alarm.
2 Select a category.
3 Select a location.
4 Select Use.
5 Enter a radius.
When you enter an area with a proximity alarm, the device sounds a tone.
32 Main Menu Tools