User manual

Viewing the Active Route
1 While navigating a route, select Active Route.
2 Select a point in the route to view additional details.
Editing a Route
You can add, remove, or rearrange points on a route.
1 Select Route Planner.
2 Select a route.
3 Select MENU > Edit Route.
4 Select a point.
5 Select an option:
• To view the point on the map, select Review.
• To change the order of the points on the route, select Move Up or Move Down.
• To insert an additional point on the route, select Insert.
The additional point is inserted before the point you are editing.
• To remove the point from the route, select Remove.
6 Select QUIT to save the route.
Editing the Name of a Route
You can customize the name of a route to make it distinct.
1 Select Route Planner.
2 Select a route.
3 Select MENU > Change Name.
4 Enter the new name.
Viewing a Route on the Map
1 Select Route Planner.
2 Select a route.
3 Select the map tab.
Viewing the Elevation Plot of a Route
The elevation plot displays the elevations for a route based on your route setting. If your device is configured for
direct routing, the elevation plot displays the straight-line elevations between route points. If your device is
configured for on-road routing, the elevation plot displays the elevations along the roads included in your route.
1 Select Route Planner.
2 Select a route.
3 Select the elevation plot tab.
Reversing a Route
You can switch the start and end points of your route to navigate the route in reverse.
1 Select Route Planner.
2 Select a route.
3 Select MENU > Reverse Route.
Deleting a Route
1 Select Route Planner.
2 Select a route.
3 Select MENU > Delete.
Navigation 21