GPSMAP 62 series ® quick start manual For use with the GPSMAP 62, 62s, 62st, 62sc, and 62stc
Getting Started warning See the Important Safety and Product Information guide in the product box for product warnings and other important information When using your device the first time, you should complete the following tasks to set up the device and get to know the basic features. 1. 2. 3. 4. 5. 6. Install the batteries (page 2). Turn on the device (page 3). Acquire satellites (page 3). Mark a waypoint (page 5). Calibrate the compass (page 6). Navigate with the search menu (page 8). 7.
Acquiring Satellite Signals It may take 30 to 60 seconds to acquire signals. 3. Replace the battery cover. For best results, after you install new batteries, update the battery type in the system settings (page 10). Turning the Device On or Off Press and hold . Setting Your Language 1. Turn on the unit. 2. Use the Rocker to select a language. GPSMAP 62 Series Quick Start Manual 1. Go outdoors to an open area. 2. If necessary, turn on the device. 3. Wait while the device searches for satellites.
Buttons 4 QUIT Press QUIT to cancel or return to the previous menu or page. ENTER Press ENTER to select options and acknowledge messages. MENU Press MENU to open the options menu for the page that is currently open. Press MENU twice to open the main menu (from any page). PAGE Press PAGE to scroll through the main pages (page 5). Press and hold to turn the device on and off. Quickly press to open the backlight status page.
Waypoints Waypoints are locations you record and store in the device. Creating Waypoints 1. From any page, press MARK. 2. Select Done. Editing a Waypoint Before you can edit a waypoint, you must create a waypoint. 1. From the main menu, select Waypoint Manager. 2. Select a waypoint. 3. Select an attribute (such as the name or location). 4. Enter the new information. 5. Select Done. Deleting a Waypoint 1. From the main menu, select Waypoint Manager. 2. Select a waypoint.
• Select Track Up to show your current direction of travel at the top of the page. • Select Automotive Mode to show a perspective view. Measuring Distance You can move the cursor around the map to measure distance from the current location. 1. From the map, press MENU. 2. Select Measure Distance. The device automatically begins measuring from your current location. 3. Move the cursor to a point you want to measure to. The distance appears at the bottom of the page. 4. Press quit to stop measuring.
You should calibrate the compass after moving long distances, experiencing temperature changes, or changing the batteries. 1. From the compass, press MENU. 2. Select Calibrate Compass > Start. 3. Follow the on-screen instructions. Calibrating the Barometric Altimeter note: The elevation plot page is available only with the GPSMAP 62s, GPSMAP 62st, GPSMAP 62sc, and GPSMAP 62stc. You can manually calibrate the barometric altimeter if you know the correct elevation or the correct pressure. 1.
Navigating to a Waypoint Using the Search Menu You can use the search menu to quickly find waypoints, tracks, routes, and coordinates that you have saved. 1. 2. 3. 4. From any page, press FIND. Select Waypoints. Select a waypoint. Select Go. Change Your Guidance Method You can select a guidance method that is for off-road use, that follows the roads, or that prompts you each time you begin navigating. 1. From the main menu, select Setup > Routing > Guidance Method. 2. Select an option.
Using Sight ‘N Go NOTE: Sight ‘N Go is available only with the GPSMAP 62s, GPSMAP 62st, GPSMAP 62sc, and GPSMAP 62stc. You can point the device at an object in the distance, such as a bridge, lock in the direction, and then navigate to the object. 1. From the main menu, select Sight ‘N Go. 2. Point the device at an object. 3. Select Lock Direction > Set Course. 4. Use the compass to navigate to the object. 2. Turn the device horizontally or vertically to change the orientation of the photo. 3.
Attaching the Carabiner Clip 1. Position the carabiner clip in the slots on the mounting spine. 2. Slide the clip up until it locks in place. Maximizing Battery Life Using the Battery Save Option Use the battery save option to save battery power and prolong battery life. From the main menu, select Setup > Display > Battery Save > On. 10 Decreasing the Backlight Extensive use of screen backlighting can significantly reduce battery life.
Long-Term Storage When you do not plan to use the device for several months, remove the batteries. Stored data is not lost when batteries are removed. Registering Your Device Help us better support you by completing our online registration today. • Go to http://my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. Resetting the Device If your device screen or buttons stop responding, you can reset the device. 1. Remove the batteries. 2. Reinstall the batteries (page 2).
© 2010–2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA TRA REGISTERED No: ER0067639/11 DEALER No: 0015955/08 Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Zhangshu 2nd Road, Xizhi Dist., New Taipei City, 221, Taiwan (R.O.C.) www.garmin.com Garmin®, the Garmin logo, and GPSMAP® are trademarks of Garmin Ltd.
