Owner's Manual

Powerboat Autopilot Operation
GHC 10 Owner’s Manual 9

The autopilot steers the boat according to a route dened on your
chartplotter. Your GHC 10 must be connected to a NMEA 2000 or NMEA
0183 compatible chartplotter to use route to.

Before you can begin using route to, you must dene a route on your
chartplotter. Refer to the owner’s manual included with your chartplotter for
information on how to dene a route.
From the heading screen, select  >  > .
The autopilot steers your boat according to the route dened on your
chartplotter, and the heading screen shows the distance to the next turn ➀
and distance off course ➋ .
➊
➋

The orbit pattern steers the boat in a continuous circle around the active
waypoint (page 8). The size of the circle is dened by your distance from the
active waypoint when you begin the orbit pattern. There are no settings to
adjust.

1. From the heading screen, select  >  >  >
.
2. Select an option:
• Select to begin a clockwise turn.
• Select to begin a counter-clockwise turn.
The autopilot steers your boat in a continuous circle around the active
waypoint, and the heading screen shows the direction of orbit ➊ .
➊