Pilot's Guide

2-6
Garmin G500H Pilot’s Guide
190-01150-02 Rev. F
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
2.2.1 Markings
A color-coded speed range strip is located on the moving tape. The colors are
configured to match the approved markings for the installation. See the AFM/
POH.
NOTE : The actual colors and patterns of the airspeed tape may vary by
installation. See your AFM/POH for more details.
2.2.2 Reference Speeds
V-speeds (Glide and V
Y
) default values are set during the installation process,
but can be changed and turned on/off from the System Setup page on the first
page of the Aux page group. When active (on), the V-speeds are displayed at
their respective locations to the right of the airspeed scale. The values you set are
retained when the unit power is cycled.
Glide Reference Marker
Vy Reference Marker
Figure 2-6 Reference Speeds