Pilot's Guide

A-6
Garmin G500H Pilot’s Guide
190-01150-02 Rev. F
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
4) Acknowledge the Power-up Page agreement by pressing the ENT key or the
right-most soft key. If a database is highlighted in yellow, it is either expired or
the G500H can not determine the date.
Figure A-5 Database Information on the Splash Screen
5) Use the large MFD knob to select the AUX page group and then the small
MFD knob to reach the System Status Page.
6) Press the DBASE soft key to place the cursor in the “DATABASE” window.
7) Turn the small MFD knob to scroll through the list and check that all databases
are current and there are no errors.
8) Power down the GDU 620.