Pilot's Guide

4-15190-01150-02 Rev. F
Garmin G500H Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
Figure 4-17 Select Inhibit Terrain-HSVT Alerting (Alerts Will Be Inhibited)
2) Use the large or small MFD knob to highlight “Inhibit Terrain” or “Enable
Terrain” (choice dependent on current state) and press the ENT key.
4.5.4 Garmin Terrain-HSVT™ Reduce Protection
(RP) Mode
The reduced protection mode functionality allows operating with a reduction
in the alerting thresholds, and suppresses visual and aural annunciation of
caution alerts. Reduced protection allows low level operations and landings off
airport with a minimum number of alerts while continuing to provide protection
from terrain and obstacles. Reduced Protection should only be selected when
operating in visual contact with the terrain as alerting times are significantly less
than in normal mode.
Enable or disable Reduce Protection (RP) Mode on the Garmin Terrain-HSVT
page. The Page Menu selections allow you to hide or show aviation data overlay
on the Terrain Map page.
The MFD Terrain Scale will show a "RP" annunciation when RP Mode is
enabled. The "RP" annunciation will also be shown in the upper right corner of
the PFD.
Figure 4-18 MFD and PFD RP Mode Annunciation