Pilot's Guide

4-14
Garmin G500H Pilot’s Guide
190-01150-02 Rev. F
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
4.5.3 Inhibiting/Enabling Garmin Terrain-HSVT™
Alerting
Terrain-HSVT has an inhibit mode that deactivates the aural and visual alerts.
Pilots should use discretion when inhibiting Terrain-HSVT and always remember
to enable the system when appropriate.
When Terrain HSVT is inhibited the following terrain alerts functions are
inhibited:
• AuralAlerts
• PopupalertonMFD
• AnnunciatoronPFD
• TerrainwarningandcautionshadingonPFDsyntheticterrain
NOTE: See AFMS for guidance on inhibiting Terrain-HSVT.
Figure 4-16 Terrain-HSVT Alerting Disabled (Alerts Inhibited) Annunciation (PFD & MFD)
1) In MAP page group, turn the small MFD knob to reach the HTerrain SVT Page.
2) Press the INHIBIT soft key to inhibit or enable Terrain SVT (choice dependent
on current state).
OR
1) Press the MENU key.