Cockpit Reference Guide

17
G500H Cockpit Reference Guide
190-01150-03 Rev E
PRIMARY FLIGHT DISPLAY (PFD)
PRIMARY FLIGHT DISPLAY
The following features are part of the Terrain-HSVT system. For more details
refer to the latest revision of the G500H Pilot’s Guide, 190-01150-02.
Flight Path Marker• Airport Signs•
Horizon Heading Marks• Runway Display•
Terrain/Obstacle Display and Alerting• Water•
Three-dimensional Traffi c•
Zero-Pitch Line•
NOTE: Terrain-HSVT may be deactivated under certain conditions, such
as loss of heading. Once condition is resolved, reactivate Terrain-HSVT,
press the PFD soft key followed by the SYN VIS soft key, then the SYN
TERR soft key.
NOTE: Terrain-HSVT features are not a substitute for standard course
and altitude deviation information using the CDI, VSI, and VDI.
Displaying Garmin Terrain-HSVT
™
Terrain
Press the 1) PFD soft key.
Press the 2) SYN VIS soft key.
Press the 3) SYN TERR soft key.
Press the 4) BACK soft key to return to the previous page.
Displaying Heading on the Horizon
Press the 1) PFD soft key.
Press the 2) SYN VIS soft key.
If not already enabled, press the 3) SYN TERR soft key.
Press the 4) HRZN HDG soft key.
Press the 5) BACK soft key to return to the previous page.
Displaying Airport Signs
NOTE: The ‘Airport Signs’ feature will only display airports, not heliports.
Press the 1) PFD soft key.
Press the 2) SYN VIS soft key.
If not already enabled, press the 3) SYN TERR soft key.
Press the 4) APTSIGNS soft key.
Press the 5) BACK soft key to return to the previous page.