Cockpit Reference Guide

3
G500H Cockpit Reference Guide
190-01150-03 Rev E
PRIMARY FLIGHT DISPLAY (PFD)
PRIMARY FLIGHT DISPLAY
5
Attitude Sync Soft Key: Allows the synchronization of the aircraft to the horizon in
level fl ight.
6
Heading Select Key: Press HDG and turn PFD knob to set heading bug.
7
Course Select Key: Press CRS and turn PFD knob to set the course of the selected
source (VOR1, VOR2, GPS1, or GPS2).
8
Altitude Select Key: Press ALT and turn PFD knob to set altimeter bug.
9
V/S (Vertical Speed) Select Key: Press V/S and turn PFD knob to set V/S bug.
10
Barometer Select Key: Press BARO and turn PFD knob to change barometric setting.
11
PFD Knob: Turn PFD knob to change bug settings, Heading Bug, Course, Altitude Bug,
V/S Bug, and Barometer setting.
12
Soft Keys: Used to select available options on PFD or MFD.
13
SD Card Slots, Upper and Lower: The upper slot is used for updating databases or
software, the lower slot is for the database card.
14
Soft Key Labels: Located on the bottom screen of the PFD and MFD. Selection is done
by pressing the corresponding soft key. Soft keys that are available have the labels
shown as white text on a black background. Soft keys that are selected have the labels
shown as black text on a gray background. Soft keys that are unavailable have the
labels shown as gray text on a black background.
15
Horizontal Situation Indicator (HSI): Displays the Selected Heading Box, Current
Heading, Turn Rate Markings, and Heading Trend.
16
Vertical Speed Tape: Displays Vertical Speed and the Vertical Speed Bug
17
Barometric (BARO) Setting: Displays the current setting of barometric pressure.
18
Roll Pointer and Slip/Skid Indicator: The slip/skid indicator is the bar beneath the roll
pointer. The indicator moves with the roll pointer and laterally away from the pointer
to indicate lateral acceleration (slip/skid).
19
Altitude Tape: Displays Current Altitude, Altitude Trend, Altitude Bug, Altitude
Minimums Bug and BARO setting.
20
Radar Altimeter Display: Displays current height above ground from the radar
altimeter. Brown band in altitude tape represents the ground.