Instruction Manual

Instructions for Continued Airworthiness 190-01527-15 Rev 1
for the Garmin G500H Installation in Eurocopter EC130 Page 13 of 82
GTP 59 OAT Probe Installation
1. Access GTP 59 OAT Probe (reference Section 6-00-00- Dimensions and Access). Inspect
GTP 59 OAT and mount for physical damage cracks, and corrosion. Treat and repair
corrosion as required in Section 20-40-00 Corrosion Control Maintenance Practices.
2. Inspect harness connections in back of unit. Secure any loose connections and support
unsecure wiring harness with additional clamping and / or tie rap supports if required.
3. Inspect unit for security of attachment. Replace the damaged or corroded hardware.
Replace any missing hardware. Torque all screws in accordance with Section 20-10-00
Torques Maintenance Practice.
Terminal Block Installation
1. Access Terminal Block Installation (reference Section 6-00-00- Dimensions and Access).
Inspect installation for physical damage cracks, and corrosion. Treat and repair corrosion as
required in Section 20-40-00 Corrosion Control Maintenance Practices.
2. Inspect unit for security of attachment. Replace the damaged or corroded hardware.
Replace any missing hardware. Torque all screws in accordance with Section 20-10-00
Torques Maintenance Practice.
Cooling Fan Installation (If option is installed)
1. Access Cooling Fan Installation (reference Section 6-00-00 Dimensions and Access).
Inspect installation for physical damage, cracks, and corrosion. Treat and repair corrosion as
required in Section 20-40-00 Corrosion Control Maintenance Practices.
2. Inspect cooling fan hoses for physical damage and security. Repair or replace any
damaged hoses. Replace any damaged or missing Tywraps
3. Inspect unit for security of attachment. Replace the damaged or corroded hardware.
Replace any missing hardware. Torque all screws in accordance with Section 20-10-00
Torques Maintenance Practices.
05-20-10