Rotorcraft Flight Manual Supplement

RFMS, Eurocopter AS350B2, B3 G500H System 190-00792-13 Rev 1
FAA APPROVED Page 23 of 25
Keys at the bottom of the display allow for the rapid selection of pre-defined
functions to be performed on each page. The soft keys operate by press and
release. More detailed configuration is typically available by pressing the
MENU button, located on the right side of the display. Pressing and holding
down the CLR key will display the main map page on the MFD. Details of the
functions available on the MFD are explained in the Garmin G500H Cockpit
Reference Guide defined in Paragraph 1.1.
4.3 Helicopter Synthetic Vision Technology (HSVT)
The HSVT function may be turned on or off, as desired. To access the HSVT
softkey menu, press the PFD softkey on the GDU 620, followed by the SYN
VIS softkey. Synthetic vision terrain, horizon headings, and airport signs can be
toggled on and off from this menu. Press the BACK softkey to return to the root
PFD menu.
4.4 HSVT Terrain
When the G500H has SVT enabled aural and visual terrain and obstacle alerting
will be provided by the Terrain HSVT function of the G500H system. Terrain
HSVT modes (normal, RP, and inhibit) can be selected via softkey on the
Terrain page on the G500H MFD.
4.5 Altitude Alerter
The Altitude Bug Setting will flash when approaching within 1000 feet of the
selected altitude, and an audio tone is played when approaching or deviating
within 200 feet of the selected altitude.