Pilot's Guide

4-87190-01102-02 Rev. E
Garmin G500 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
Figure 4-82 Select GFDS Registration
5) Turn the small MFD knob to select values and the large MFD knob to move to
the next position. Highlight REGISTER and press ENT to complete the process.
The GDU will contact the GFDS servers using the GSR 56 transceiver. If the access
code and system ID are correct, it will download and display the airframe info.
Figure 4-83 GFDS Registration Page (Default and Completed)
4.10.2.2 Deactivate Unit Registration With GFDS
Registration of the GDU unit with GFDS can be deactivated so that the unit can
no longer make requests to GFDS. This does not cancel the subscription.
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options .
2) Turn the large MFD knob to highlight “Register With GFDS.” Press ENT .
3) With the Access Code field highlighted, press CLR to remove the access code.