Cockpit Reference Guide

8
G500/600 Cockpit Reference Guide
190-00601-03 Rev G
PRIMARY FLIGHT DISPLAY (PFD)
PRIMARY FLIGHT DISPLAY
To set the altitude for the Minimums Bug:
1) While viewing the Active Flight Plan page of the FPL Group, press the small
MFD knob to activate the cursor and turn the large MFD knob to the Source
selection.
2) Turn the small MFD knob to select Off, BARO, or RAD ALT.
3) Turn the large MFD knob to the ALTITUDE portion of the MINIMUMS section.
4) Turn the small MFD knob to enter the desired altitude. Press the ENT key to
confirm selection.
5) When finished, press the small MFD knob to exit the MINIMUMS box.
The Minimums Bug can also be set from the Charts page of the FPL.
1) While viewing the Charts page of the FPL Group, press the MENU key and
select “Set Minimums” from the Options menu.
2) Turn the small MFD knob to select Off, BARO, or RAD ALT.
3) Press the ENT key to move to enter altitude. Turn the small MFD knob to
enter the desired altitude. Press the ENT key to confirm selection.
Brown band represents
the ground.
Radar Altimeter Value
Minimums Annunciations using RAD ALT for Source