Pilot's Guide

3-4
Garmin G500/600 Pilot’s Guide
190-00601-02 Rev. H
Cover TOC
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.1.2 Map Overlay Icons
Overlay icons are displayed to indicate data that will be depicted on the
map pages. The icons are shown onIf the icon is not displayed, either the
menu selection is not ON to display the data or the display range makes the
data ineligible for display. If the icon has a white X over it then the data is
selected ON and the zoom scale is correct, but the underlying data is not
available for some reason. All of the icons may not be displayed at the same
time. In some cases if one feature is selected, another icon and featuare may
be disabled. The pilot should check the dedicated page for the feature that
the icon represents to determine why the data is not available for display
(fail, standby, etc).
Traffic
Stormscope
Terrain
ADS-R/TIS-B Traffic
Obstacle
Wire Obstacle
Figure 3-4 Map Overlay Icon Samples
3.1.3 Selecting Page Options
1) Change the fields or the setup of a page by pressing the MENU key and make
the necessary adjustments with the MFD knobs.
2) Turn the large MFD knob to select desired item.
3) Turn the small MFD knob to change the highlighted value.
4) Press ENT to accept the displayed value.
5) Press the small MFD knob to cancel selection or to end editing.