Pilot's Guide

1-16
Garmin G500/600 Pilot’s Guide
190-00601-02 Rev. H
Cover TOC
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
1.4.1.2 PFD Bezel Keys
NOTE: See Section 5.6 for autopilot functions using the PFD Bezel Keys.
Heading (HDG)
Selects Heading Select mode. This is the default mode for the PFD knob.
Pressing the PFD knob in Heading mode will center the Heading Bug on the
current Heading. Set the heading bug on the HSI by turning the PFD knob
after pressing the HDG key.
Course (CRS)
Selects Course Select mode. Pressing the PFD knob in Course mode will
center the CDI for a VOR or GPS OBS course.
Altimeter (ALT)
Selects Altitude Select mode. Pressing the PFD knob in Altitude Select mode
will enter the current altitude in the Altitude Select window. Set the Altitude
Bug by turning the PFD knob after pressing the ALT key.
Altitude Select Window
Current Altitude
Altitude Bug
Barometric Setting
Figure 1-17 Pressing PFD Knob Sets Altitude Select to Current Altitude