Pilot's Guide

4-143190-00601-02 Rev. H
Garmin G500/600 Pilot’s Guide
CoverTOC
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
IFR and Mountain Obscured Line
Surface Winds Line
Cursor On AIRMET/SIGMET Line
Cursor Location
Turbulence Line
Figure 4-122 FIS-B - AIRMETs/SIGMETs
SIGMET/AIRMET (SIG/AIR) Viewing Range
The SIGMET/AIRMET Viewing Range option allows you to select the
map range where at and below that value SIGMET/AIRMET products will be
shown on the selected MFD FIS-B Weather Map page (1, 2, or 3). When Off
is selected, SIGMET/AIRMET will not be shown. For a value selected (such as,
150 NM), SIGMET/AIRMET data will be shown at map ranges of that value
(150 NM), and lower.
1) While viewing a FIS-B Weather Map page of the WX page group, press the
MENU key to display the Page Menu Options . The cursor flashes on the
“Weather Setup” option. Press ENT .
2) Turn the large MFD knob to highlight the SIG/AIR Viewing Range value.
3) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.